CMCP5304K Four Channel Protection System Solution Kit

• Complete Solution Kit Includes Monitoring System, Sensors and Cables
• Four Channel Inputs for Continuous Machine Protection Monitoring
• Cost Effective Solution Compared to Rack Based Systems
• Meets API 670 Outlining Machinery Protection Systems
• Two Levels of Adjustable Alarm with Relays
• True “OK” Circuitry with Relay
• Adjustable Alarm Time Delays
• Trip Multiply for Start Ups and Coast Downs
• 4-20mA Output per Channel
• Buffered Transducer Output
• Common Reset Button
• Class 1 Division 2 Rated Monitors
  
  The CMCP5304K is a complete packaged solution for providing a real time protection system on rotating machinery. The system comes complete with a four Vibration Velocity Monitor, four 100mV/g Accelerometer and four 32' (10m) Accelerometer Extension Cable. A 4-20mA output is provided with each monitor to allow PLC or DCS connections. Each monitor has its own independent OK, Alert and Danger relays that can be connected to a machine control system or notification system. An optional sensor accessory kit is available to prepare the surface for mounting the accelerometer.

MonitoringSystem:
Electrical Specifications:
Sensor Inputs: 4 (100mV/g accelerometers included with kit)
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 20 kHz.
Buffered Output: BNC Connector 0-20 kHz.
Accuracy: 5.0 % of Full Scale Range.
Output: 4-20 mA proportional to the full scale range.
Maximum Load: 600 Ohms Resistive per channel

Sensor and Cable:
Sensor Type: 100mV/g ICP Accelerometer (4 Included with Kit)
Cable Length: 32' (10m) (4 Included with Kit)

Environmental Specifications:
Operating Temp.: -20oC to +80oC (-4oF to +176oF).
Storage Temp.: -55oC to +125oC (-67oF to +257oF).
Relative Humidity: 0 - 95% Non-Condensing.
Approvals: NEMA 4X, NEMA 4, IP66

AdditionalInformation:
Vibration Monitor Part Number: CMCP530A-100A-02R
Pre-Packaged Enclosure Part Number: CMCP5301 Series
Sensor Part Number: CMCP770A
Cable Part Number: CMCP602L-32-01-01

TheCMCP5300K Series Monitoring Systems are one, two, four and six channelVibration Monitoring Protection System Kits that have been designed for use ontypical rotating machinery such as motors, pumps fans, turbines, compressors,chillers, etc. The CMCP5300K Series accepts inputs from the supplied 100 mV/gaccelerometers, conditions the input signals to velocity and provides a digitaldisplay and alarm status indication.

Analog outputs (4-20 mA) are provided for each channel for interface to a PLCor DCS for trending, alarm and operator interface. The alarm contacts for theOK circuit, and Alert and Danger may be interfaced to machine control andshutdown systems for a complete vibration protection solution. A BNC BufferedOutput Connector is available on each monitor to provide a connection forfurther fault analysis with a vibration data collector, such as SKF's Microlog.The system is a pre-wired turn-key package with power supply, and bright LEDdisplays. The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They areavailable in either an English or Metric configuration.

The CMCP5300K Series Monitoring Systems come standard with STI’sCMCP530A-100A-02R but are also available with any other CMCP500 SeriesMonitors, please contact STI for more information. CMCP770A General PurposeAccelerometers and CMCP602L-32-01-01 Cables are also included. The enclosure isavailable in NEMA 4X Fiberglass, NEMA 4 Painted Steel and NEMA 4X StainlessSteel. An optional sensor installation kit is available to assist in installingthe sensors.