The CMCP793V-500 Piezoelectric Velocity Sensor are measurement devices that are used to examine vibration signals in terms of velocity (in/sec) to amplify the signal of interest. The CMCP793V-500 inherently decreases high frequency signals allowing better measurement of low frequency vibration. The CMCP793V-500 sensor is essentially an accelerometer with an internal integration circuit which will produce an output relative to velocity. The CMCP793V-500 is the ideal accelerometer for use on most types of rotating equipment. The CMCP793V-500 is lightweight and can be used for magnet or permanent mount applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP793V-500 is waterproof and can be hosed down or submersed when using the proper extension cable such as the CMCP602 series.
The CMCP793V-500 is stocked in the industry standard 500 mV/In/Sec sensitivity, an optional 100 mV/In/Sec version is available.
See datasheet for additional details.
Features:
Sensitivity: 500 mV/in/sec ±10%
Frequency Response (±3dB): 2 Hz to 6 kHz (120 cpm to 260k cpm)
Dynamic Range: ±40 In/Sec
Power Requirements: 18-30 VDC
Temperature Range: -67 to 284°F (-55 to 140°C)
Settling Time: 1 Second
Case Material: 316L Stainless Steel
Connector: 2 Pin MIL-C-5015
Leading the way in the industry since 1989, STI Vibration Monitoring excels in producing and supplying vibration monitoring systems and accessories for predictive maintenance. STI's mission is to offer affordable alternatives to extensive rack-based systems by introducing single-channel transmitters and monitors for vibration, position, and temperature. Check out our economical integral cables now!
